Briquette machine – Diesel Engine driven – by Thai Sumi Company (THAILAND)
11HP Diesel engine driven – Capacity 200-300 kg/hr (depending on type of charcoal)
Standard capacity with manual start or battery start engine.
High density briquette making with adjustable speed/density system.
Please visity our website for contact information and more photos/videos.
Pellet making and Briquette making of Carbon from Pyrolysis process of Scrap Tyre / old tire to produce oil
The pellet making of fine carbon (powder form) from scrap tyre pyrolysis plant (oil production) is slightly more difficult than production of pellet from coal or charcoal. The oil content in the carbon powder is one of the factors.
Normally oil content in the carbon powder should not be higher than 2-3%, otherwise binder will be required. In case that binder is required, the mixing of fine carbon powder and binder dispersion are the key to the success of pellet production.
Common problems with the pellet making from carbon powder from pyrolysis of tire are dispersion, high oil content and feeding of powder into pelletizer (difficult to feed). The design of machine must take these factors into account.
Concerning the briquette making of fine carbon powder by screw press type machine, it is more difficult and has more factors to the success of the briquetting process. The main trouble is the heat generated by screw-press type machine will cause the change of powder’s characteristics (soften). Typically, the briquette made from screw-press type machine is not very high in density so it can be used as fuel for starting up the operation of the pyrolysis process (not very good if you want to sell them as briquette).
Thai Sumi Company
Following is a normal carbon pellet making. Screener is required to remove remaining fine powder.