Animal Feed Briquette machine test & modification
Briquette size 1.5″ and 1.0″ . Smaller diameter is better with pellet making machine.
Kiln types for charcoal making
Normally there is no machine to make charcoal from wood. In Thailand, normally we are using batch process (brick-cement type kiln, which is constructed from only brick and cement or clay type, as you can see from the photo below).
Also, metal type kiln is also available and it is good for producing high quality charcoal (can withstand higher temperature, thus lower ash content and higher carbon content).
Olive waste briquetting information (part #1)
I hope you are not getting tired of the questions but I still have these:
You wrote that (I quote) : “.. Anyway, higher the density of the briquette is, the longer the drying time requires..”.
the more compacted the briquettes are, the more time it requires to dry?
It is correct?
[Answer]: Yes, you understand correctly.
second question: If I succeed to get decent briquettes manually (which means without using a presses), can I assume that the result will be even better when I will be using a hydraulic press?
[Answer]: Yes, it is supposed to be that way. The result may be a lot better that making briquette by hand because you will never reach such high pressure the machine can do.
last question : are you building your own machines that you are selling?
[Answer]: Yes, we build our own machines everything by ourselves. The reason I suggested you try to find the standard hydraulic press unit (as photo) is that it would be easy and much cheaper for you.
Actually, the latest try gave me the impression that it might be a good idea to grind first the olive stones, char the grinded stones and then mold them. When molded, then they can be charred.
That is the latest idea I came with but I have not applied it yet to see if it is a better option. i thought of that because I noticed that the smaller the olive stones were, the quickest the charring process was. therefore, if I were to grind to stones into a powder, the charring process will be faster.
All my test so far were following this succession of steps : char the olive stones, grind them and then mold them.
I might stick to this process for the moment.
I will have plenty of olive stones available for my tests (I can even send some to you).
I can find different machines to char and grind, As for the molding machine, I am not sure there are any over there (i have not found any so far). That is why i though of you.
Out of curiosity : do you think, it is possible to make briquettes without adding any binder?
It would be great if you can send the sample to us to make the briquette for your reference.
It cannot be made into briquette without binder. Please note that the binding agent can be anything that gives stickiness, i.e.starch, flour, molasses, etc.
It is need to confirm the raw material first to offer the right equipment set to you. The charcoal briquette making from charcoal chunk/powder is the common method and proven technology. More than half of the charcoal briquette being sold in the market is this type. So, it would be great if you can char your raw material first. You can also mix them with other charcoal or some other fine materials too to improve the quality or reduce the cost.
Briquette making factory
Automatic & Simple – Reliable system
For charcoal, coal, biomass